diff options
Diffstat (limited to 'nixpkgs/nixos/modules/system/boot/systemd-unit-options.nix')
| -rw-r--r-- | nixpkgs/nixos/modules/system/boot/systemd-unit-options.nix | 518 |
1 files changed, 518 insertions, 0 deletions
diff --git a/nixpkgs/nixos/modules/system/boot/systemd-unit-options.nix b/nixpkgs/nixos/modules/system/boot/systemd-unit-options.nix new file mode 100644 index 00000000000..c1f2c98afcd --- /dev/null +++ b/nixpkgs/nixos/modules/system/boot/systemd-unit-options.nix @@ -0,0 +1,518 @@ +{ config, lib }: + +with lib; +with import ./systemd-lib.nix { inherit config lib pkgs; }; + +let + checkService = checkUnitConfig "Service" [ + (assertValueOneOf "Type" [ + "exec" "simple" "forking" "oneshot" "dbus" "notify" "idle" + ]) + (assertValueOneOf "Restart" [ + "no" "on-success" "on-failure" "on-abnormal" "on-abort" "always" + ]) + ]; + +in rec { + + unitOption = mkOptionType { + name = "systemd option"; + merge = loc: defs: + let + defs' = filterOverrides defs; + defs'' = getValues defs'; + in + if isList (head defs'') + then concatLists defs'' + else mergeOneOption loc defs'; + }; + + sharedOptions = { + + enable = mkOption { + default = true; + type = types.bool; + description = '' + If set to false, this unit will be a symlink to + /dev/null. This is primarily useful to prevent specific + template instances + (e.g. <literal>serial-getty@ttyS0</literal>) from being + started. Note that <literal>enable=true</literal> does not + make a unit start by default at boot; if you want that, see + <literal>wantedBy</literal>. + ''; + }; + + requiredBy = mkOption { + default = []; + type = types.listOf types.str; + description = '' + Units that require (i.e. depend on and need to go down with) + this unit. The discussion under <literal>wantedBy</literal> + applies here as well: inverse <literal>.requires</literal> + symlinks are established. + ''; + }; + + wantedBy = mkOption { + default = []; + type = types.listOf types.str; + description = '' + Units that want (i.e. depend on) this unit. The standard way + to make a unit start by default at boot is to set this option + to <literal>[ "multi-user.target" ]</literal>. That's despite + the fact that the systemd.unit(5) manpage says this option + goes in the <literal>[Install]</literal> section that controls + the behaviour of <literal>systemctl enable</literal>. Since + such a process is stateful and thus contrary to the design of + NixOS, setting this option instead causes the equivalent + inverse <literal>.wants</literal> symlink to be present, + establishing the same desired relationship in a stateless way. + ''; + }; + + aliases = mkOption { + default = []; + type = types.listOf types.str; + description = "Aliases of that unit."; + }; + + }; + + concreteUnitOptions = sharedOptions // { + + text = mkOption { + type = types.nullOr types.str; + default = null; + description = "Text of this systemd unit."; + }; + + unit = mkOption { + internal = true; + description = "The generated unit."; + }; + + }; + + commonUnitOptions = sharedOptions // { + + description = mkOption { + default = ""; + type = types.str; + description = "Description of this unit used in systemd messages and progress indicators."; + }; + + documentation = mkOption { + default = []; + type = types.listOf types.str; + description = "A list of URIs referencing documentation for this unit or its configuration."; + }; + + requires = mkOption { + default = []; + type = types.listOf types.str; + description = '' + Start the specified units when this unit is started, and stop + this unit when the specified units are stopped or fail. + ''; + }; + + wants = mkOption { + default = []; + type = types.listOf types.str; + description = '' + Start the specified units when this unit is started. + ''; + }; + + after = mkOption { + default = []; + type = types.listOf types.str; + description = '' + If the specified units are started at the same time as + this unit, delay this unit until they have started. + ''; + }; + + before = mkOption { + default = []; + type = types.listOf types.str; + description = '' + If the specified units are started at the same time as + this unit, delay them until this unit has started. + ''; + }; + + bindsTo = mkOption { + default = []; + type = types.listOf types.str; + description = '' + Like ‘requires’, but in addition, if the specified units + unexpectedly disappear, this unit will be stopped as well. + ''; + }; + + partOf = mkOption { + default = []; + type = types.listOf types.str; + description = '' + If the specified units are stopped or restarted, then this + unit is stopped or restarted as well. + ''; + }; + + conflicts = mkOption { + default = []; + type = types.listOf types.str; + description = '' + If the specified units are started, then this unit is stopped + and vice versa. + ''; + }; + + requisite = mkOption { + default = []; + type = types.listOf types.str; + description = '' + Similar to requires. However if the units listed are not started, + they will not be started and the transaction will fail. + ''; + }; + + unitConfig = mkOption { + default = {}; + example = { RequiresMountsFor = "/data"; }; + type = types.attrsOf unitOption; + description = '' + Each attribute in this set specifies an option in the + <literal>[Unit]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.unit</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> for details. + ''; + }; + + restartTriggers = mkOption { + default = []; + type = types.listOf types.unspecified; + description = '' + An arbitrary list of items such as derivations. If any item + in the list changes between reconfigurations, the service will + be restarted. + ''; + }; + + onFailure = mkOption { + default = []; + type = types.listOf types.str; + description = '' + A list of one or more units that are activated when + this unit enters the "failed" state. + ''; + }; + + startLimitIntervalSec = mkOption { + type = types.int; + description = '' + Configure unit start rate limiting. Units which are started + more than burst times within an interval time interval are + not permitted to start any more. + ''; + }; + + }; + + + serviceOptions = commonUnitOptions // { + + environment = mkOption { + default = {}; + type = with types; attrsOf (nullOr (oneOf [ str path package ])); + example = { PATH = "/foo/bar/bin"; LANG = "nl_NL.UTF-8"; }; + description = "Environment variables passed to the service's processes."; + }; + + path = mkOption { + default = []; + apply = ps: "${makeBinPath ps}:${makeSearchPathOutput "bin" "sbin" ps}"; + description = '' + Packages added to the service's <envar>PATH</envar> + environment variable. Both the <filename>bin</filename> + and <filename>sbin</filename> subdirectories of each + package are added. + ''; + }; + + serviceConfig = mkOption { + default = {}; + example = + { StartLimitInterval = 10; + RestartSec = 5; + }; + type = types.addCheck (types.attrsOf unitOption) checkService; + description = '' + Each attribute in this set specifies an option in the + <literal>[Service]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.service</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> for details. + ''; + }; + + script = mkOption { + type = types.lines; + default = ""; + description = "Shell commands executed as the service's main process."; + }; + + scriptArgs = mkOption { + type = types.str; + default = ""; + description = "Arguments passed to the main process script."; + }; + + preStart = mkOption { + type = types.lines; + default = ""; + description = '' + Shell commands executed before the service's main process + is started. + ''; + }; + + postStart = mkOption { + type = types.lines; + default = ""; + description = '' + Shell commands executed after the service's main process + is started. + ''; + }; + + reload = mkOption { + type = types.lines; + default = ""; + description = '' + Shell commands executed when the service's main process + is reloaded. + ''; + }; + + preStop = mkOption { + type = types.lines; + default = ""; + description = '' + Shell commands executed to stop the service. + ''; + }; + + postStop = mkOption { + type = types.lines; + default = ""; + description = '' + Shell commands executed after the service's main process + has exited. + ''; + }; + + restartIfChanged = mkOption { + type = types.bool; + default = true; + description = '' + Whether the service should be restarted during a NixOS + configuration switch if its definition has changed. + ''; + }; + + reloadIfChanged = mkOption { + type = types.bool; + default = false; + description = '' + Whether the service should be reloaded during a NixOS + configuration switch if its definition has changed. If + enabled, the value of <option>restartIfChanged</option> is + ignored. + ''; + }; + + stopIfChanged = mkOption { + type = types.bool; + default = true; + description = '' + If set, a changed unit is restarted by calling + <command>systemctl stop</command> in the old configuration, + then <command>systemctl start</command> in the new one. + Otherwise, it is restarted in a single step using + <command>systemctl restart</command> in the new configuration. + The latter is less correct because it runs the + <literal>ExecStop</literal> commands from the new + configuration. + ''; + }; + + startAt = mkOption { + type = with types; either str (listOf str); + default = []; + example = "Sun 14:00:00"; + description = '' + Automatically start this unit at the given date/time, which + must be in the format described in + <citerefentry><refentrytitle>systemd.time</refentrytitle> + <manvolnum>7</manvolnum></citerefentry>. This is equivalent + to adding a corresponding timer unit with + <option>OnCalendar</option> set to the value given here. + ''; + apply = v: if isList v then v else [ v ]; + }; + + }; + + + socketOptions = commonUnitOptions // { + + listenStreams = mkOption { + default = []; + type = types.listOf types.str; + example = [ "0.0.0.0:993" "/run/my-socket" ]; + description = '' + For each item in this list, a <literal>ListenStream</literal> + option in the <literal>[Socket]</literal> section will be created. + ''; + }; + + socketConfig = mkOption { + default = {}; + example = { ListenStream = "/run/my-socket"; }; + type = types.attrsOf unitOption; + description = '' + Each attribute in this set specifies an option in the + <literal>[Socket]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.socket</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> for details. + ''; + }; + + }; + + + timerOptions = commonUnitOptions // { + + timerConfig = mkOption { + default = {}; + example = { OnCalendar = "Sun 14:00:00"; Unit = "foo.service"; }; + type = types.attrsOf unitOption; + description = '' + Each attribute in this set specifies an option in the + <literal>[Timer]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.timer</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> and + <citerefentry><refentrytitle>systemd.time</refentrytitle> + <manvolnum>7</manvolnum></citerefentry> for details. + ''; + }; + + }; + + + pathOptions = commonUnitOptions // { + + pathConfig = mkOption { + default = {}; + example = { PathChanged = "/some/path"; Unit = "changedpath.service"; }; + type = types.attrsOf unitOption; + description = '' + Each attribute in this set specifies an option in the + <literal>[Path]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.path</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> for details. + ''; + }; + + }; + + + mountOptions = commonUnitOptions // { + + what = mkOption { + example = "/dev/sda1"; + type = types.str; + description = "Absolute path of device node, file or other resource. (Mandatory)"; + }; + + where = mkOption { + example = "/mnt"; + type = types.str; + description = '' + Absolute path of a directory of the mount point. + Will be created if it doesn't exist. (Mandatory) + ''; + }; + + type = mkOption { + default = ""; + example = "ext4"; + type = types.str; + description = "File system type."; + }; + + options = mkOption { + default = ""; + example = "noatime"; + type = types.commas; + description = "Options used to mount the file system."; + }; + + mountConfig = mkOption { + default = {}; + example = { DirectoryMode = "0775"; }; + type = types.attrsOf unitOption; + description = '' + Each attribute in this set specifies an option in the + <literal>[Mount]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.mount</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> for details. + ''; + }; + }; + + automountOptions = commonUnitOptions // { + + where = mkOption { + example = "/mnt"; + type = types.str; + description = '' + Absolute path of a directory of the mount point. + Will be created if it doesn't exist. (Mandatory) + ''; + }; + + automountConfig = mkOption { + default = {}; + example = { DirectoryMode = "0775"; }; + type = types.attrsOf unitOption; + description = '' + Each attribute in this set specifies an option in the + <literal>[Automount]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.automount</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> for details. + ''; + }; + }; + + targetOptions = commonUnitOptions; + + sliceOptions = commonUnitOptions // { + + sliceConfig = mkOption { + default = {}; + example = { MemoryMax = "2G"; }; + type = types.attrsOf unitOption; + description = '' + Each attribute in this set specifies an option in the + <literal>[Slice]</literal> section of the unit. See + <citerefentry><refentrytitle>systemd.slice</refentrytitle> + <manvolnum>5</manvolnum></citerefentry> for details. + ''; + }; + + }; + +} |