diff options
Diffstat (limited to 'nixpkgs/lib/systems/platforms.nix')
-rw-r--r-- | nixpkgs/lib/systems/platforms.nix | 471 |
1 files changed, 471 insertions, 0 deletions
diff --git a/nixpkgs/lib/systems/platforms.nix b/nixpkgs/lib/systems/platforms.nix new file mode 100644 index 00000000000..ab3cf1d5430 --- /dev/null +++ b/nixpkgs/lib/systems/platforms.nix @@ -0,0 +1,471 @@ +{ lib }: +rec { + pcBase = { + name = "pc"; + kernelBaseConfig = "defconfig"; + # Build whatever possible as a module, if not stated in the extra config. + kernelAutoModules = true; + kernelTarget = "bzImage"; + }; + + pc64 = pcBase // { kernelArch = "x86_64"; }; + + pc32 = pcBase // { kernelArch = "i386"; }; + + pc32_simplekernel = pc32 // { + kernelAutoModules = false; + }; + + pc64_simplekernel = pc64 // { + kernelAutoModules = false; + }; + + powernv = { + name = "PowerNV"; + kernelArch = "powerpc"; + kernelBaseConfig = "powernv_defconfig"; + kernelTarget = "zImage"; + kernelInstallTarget = "install"; + kernelFile = "vmlinux"; + kernelAutoModules = true; + # avoid driver/FS trouble arising from unusual page size + kernelExtraConfig = '' + PPC_64K_PAGES n + PPC_4K_PAGES y + IPV6 y + ''; + }; + + ## + ## ARM + ## + + pogoplug4 = { + name = "pogoplug4"; + + gcc = { + arch = "armv5te"; + }; + + kernelMajor = "2.6"; + kernelBaseConfig = "multi_v5_defconfig"; + kernelArch = "arm"; + kernelAutoModules = false; + kernelExtraConfig = + '' + # Ubi for the mtd + MTD_UBI y + UBIFS_FS y + UBIFS_FS_XATTR y + UBIFS_FS_ADVANCED_COMPR y + UBIFS_FS_LZO y + UBIFS_FS_ZLIB y + UBIFS_FS_DEBUG n + ''; + kernelMakeFlags = [ "LOADADDR=0x8000" ]; + kernelTarget = "uImage"; + # TODO reenable once manual-config's config actually builds a .dtb and this is checked to be working + #kernelDTB = true; + }; + + sheevaplug = { + name = "sheevaplug"; + kernelMajor = "2.6"; + kernelBaseConfig = "multi_v5_defconfig"; + kernelArch = "arm"; + kernelAutoModules = false; + kernelExtraConfig = '' + BLK_DEV_RAM y + BLK_DEV_INITRD y + BLK_DEV_CRYPTOLOOP m + BLK_DEV_DM m + DM_CRYPT m + MD y + REISERFS_FS m + BTRFS_FS m + XFS_FS m + JFS_FS m + EXT4_FS m + USB_STORAGE_CYPRESS_ATACB m + + # mv cesa requires this sw fallback, for mv-sha1 + CRYPTO_SHA1 y + # Fast crypto + CRYPTO_TWOFISH y + CRYPTO_TWOFISH_COMMON y + CRYPTO_BLOWFISH y + CRYPTO_BLOWFISH_COMMON y + + IP_PNP y + IP_PNP_DHCP y + NFS_FS y + ROOT_NFS y + TUN m + NFS_V4 y + NFS_V4_1 y + NFS_FSCACHE y + NFSD m + NFSD_V2_ACL y + NFSD_V3 y + NFSD_V3_ACL y + NFSD_V4 y + NETFILTER y + IP_NF_IPTABLES y + IP_NF_FILTER y + IP_NF_MATCH_ADDRTYPE y + IP_NF_TARGET_LOG y + IP_NF_MANGLE y + IPV6 m + VLAN_8021Q m + + CIFS y + CIFS_XATTR y + CIFS_POSIX y + CIFS_FSCACHE y + CIFS_ACL y + + WATCHDOG y + WATCHDOG_CORE y + ORION_WATCHDOG m + + ZRAM m + NETCONSOLE m + + # Disable OABI to have seccomp_filter (required for systemd) + # https://github.com/raspberrypi/firmware/issues/651 + OABI_COMPAT n + + # Fail to build + DRM n + SCSI_ADVANSYS n + USB_ISP1362_HCD n + SND_SOC n + SND_ALI5451 n + FB_SAVAGE n + SCSI_NSP32 n + ATA_SFF n + SUNGEM n + IRDA n + ATM_HE n + SCSI_ACARD n + BLK_DEV_CMD640_ENHANCED n + + FUSE_FS m + + # systemd uses cgroups + CGROUPS y + + # Latencytop + LATENCYTOP y + + # Ubi for the mtd + MTD_UBI y + UBIFS_FS y + UBIFS_FS_XATTR y + UBIFS_FS_ADVANCED_COMPR y + UBIFS_FS_LZO y + UBIFS_FS_ZLIB y + UBIFS_FS_DEBUG n + + # Kdb, for kernel troubles + KGDB y + KGDB_SERIAL_CONSOLE y + KGDB_KDB y + ''; + kernelMakeFlags = [ "LOADADDR=0x0200000" ]; + kernelTarget = "uImage"; + kernelDTB = true; # Beyond 3.10 + gcc = { + arch = "armv5te"; + }; + }; + + raspberrypi = { + name = "raspberrypi"; + kernelMajor = "2.6"; + kernelBaseConfig = "bcm2835_defconfig"; + kernelDTB = true; + kernelArch = "arm"; + kernelAutoModules = true; + kernelPreferBuiltin = true; + kernelExtraConfig = '' + # Disable OABI to have seccomp_filter (required for systemd) + # https://github.com/raspberrypi/firmware/issues/651 + OABI_COMPAT n + ''; + kernelTarget = "zImage"; + gcc = { + arch = "armv6"; + fpu = "vfp"; + }; + }; + + # Legacy attribute, for compatibility with existing configs only. + raspberrypi2 = armv7l-hf-multiplatform; + + scaleway-c1 = armv7l-hf-multiplatform // { + gcc = { + cpu = "cortex-a9"; + fpu = "vfpv3"; + }; + }; + + utilite = { + name = "utilite"; + kernelMajor = "2.6"; + kernelBaseConfig = "multi_v7_defconfig"; + kernelArch = "arm"; + kernelAutoModules = false; + kernelExtraConfig = + '' + # Ubi for the mtd + MTD_UBI y + UBIFS_FS y + UBIFS_FS_XATTR y + UBIFS_FS_ADVANCED_COMPR y + UBIFS_FS_LZO y + UBIFS_FS_ZLIB y + UBIFS_FS_DEBUG n + ''; + kernelMakeFlags = [ "LOADADDR=0x10800000" ]; + kernelTarget = "uImage"; + kernelDTB = true; + gcc = { + cpu = "cortex-a9"; + fpu = "neon"; + }; + }; + + guruplug = sheevaplug // { + # Define `CONFIG_MACH_GURUPLUG' (see + # <http://kerneltrap.org/mailarchive/git-commits-head/2010/5/19/33618>) + # and other GuruPlug-specific things. Requires the `guruplug-defconfig' + # patch. + + kernelBaseConfig = "guruplug_defconfig"; + }; + + beaglebone = armv7l-hf-multiplatform // { + name = "beaglebone"; + kernelBaseConfig = "bb.org_defconfig"; + kernelAutoModules = false; + kernelExtraConfig = ""; # TBD kernel config + kernelTarget = "zImage"; + }; + + # https://developer.android.com/ndk/guides/abis#v7a + armv7a-android = { + name = "armeabi-v7a"; + gcc = { + arch = "armv7-a"; + float-abi = "softfp"; + fpu = "vfpv3-d16"; + }; + }; + + armv7l-hf-multiplatform = { + name = "armv7l-hf-multiplatform"; + kernelMajor = "2.6"; # Using "2.6" enables 2.6 kernel syscalls in glibc. + kernelBaseConfig = "multi_v7_defconfig"; + kernelArch = "arm"; + kernelDTB = true; + kernelAutoModules = true; + kernelPreferBuiltin = true; + kernelTarget = "zImage"; + kernelExtraConfig = '' + # Serial port for Raspberry Pi 3. Upstream forgot to add it to the ARMv7 defconfig. + SERIAL_8250_BCM2835AUX y + SERIAL_8250_EXTENDED y + SERIAL_8250_SHARE_IRQ y + + # Fix broken sunxi-sid nvmem driver. + TI_CPTS y + + # Hangs ODROID-XU4 + ARM_BIG_LITTLE_CPUIDLE n + + # Disable OABI to have seccomp_filter (required for systemd) + # https://github.com/raspberrypi/firmware/issues/651 + OABI_COMPAT n + ''; + gcc = { + # Some table about fpu flags: + # http://community.arm.com/servlet/JiveServlet/showImage/38-1981-3827/blogentry-103749-004812900+1365712953_thumb.png + # Cortex-A5: -mfpu=neon-fp16 + # Cortex-A7 (rpi2): -mfpu=neon-vfpv4 + # Cortex-A8 (beaglebone): -mfpu=neon + # Cortex-A9: -mfpu=neon-fp16 + # Cortex-A15: -mfpu=neon-vfpv4 + + # More about FPU: + # https://wiki.debian.org/ArmHardFloatPort/VfpComparison + + # vfpv3-d16 is what Debian uses and seems to be the best compromise: NEON is not supported in e.g. Scaleway or Tegra 2, + # and the above page suggests NEON is only an improvement with hand-written assembly. + arch = "armv7-a"; + fpu = "vfpv3-d16"; + + # For Raspberry Pi the 2 the best would be: + # cpu = "cortex-a7"; + # fpu = "neon-vfpv4"; + }; + }; + + aarch64-multiplatform = { + name = "aarch64-multiplatform"; + kernelMajor = "2.6"; # Using "2.6" enables 2.6 kernel syscalls in glibc. + kernelBaseConfig = "defconfig"; + kernelArch = "arm64"; + kernelDTB = true; + kernelAutoModules = true; + kernelPreferBuiltin = true; + kernelExtraConfig = '' + # Raspberry Pi 3 stuff. Not needed for kernels >= 4.10. + ARCH_BCM2835 y + BCM2835_MBOX y + BCM2835_WDT y + RASPBERRYPI_FIRMWARE y + RASPBERRYPI_POWER y + SERIAL_8250_BCM2835AUX y + SERIAL_8250_EXTENDED y + SERIAL_8250_SHARE_IRQ y + + # Cavium ThunderX stuff. + PCI_HOST_THUNDER_ECAM y + + # Nvidia Tegra stuff. + PCI_TEGRA y + + # The default (=y) forces us to have the XHCI firmware available in initrd, + # which our initrd builder can't currently do easily. + USB_XHCI_TEGRA m + ''; + kernelTarget = "Image"; + gcc = { + arch = "armv8-a"; + }; + }; + + ## + ## MIPS + ## + + ben_nanonote = { + name = "ben_nanonote"; + kernelMajor = "2.6"; + kernelArch = "mips"; + gcc = { + arch = "mips32"; + float = "soft"; + }; + }; + + fuloong2f_n32 = { + name = "fuloong2f_n32"; + kernelMajor = "2.6"; + kernelBaseConfig = "lemote2f_defconfig"; + kernelArch = "mips"; + kernelAutoModules = false; + kernelExtraConfig = '' + MIGRATION n + COMPACTION n + + # nixos mounts some cgroup + CGROUPS y + + BLK_DEV_RAM y + BLK_DEV_INITRD y + BLK_DEV_CRYPTOLOOP m + BLK_DEV_DM m + DM_CRYPT m + MD y + REISERFS_FS m + EXT4_FS m + USB_STORAGE_CYPRESS_ATACB m + + IP_PNP y + IP_PNP_DHCP y + IP_PNP_BOOTP y + NFS_FS y + ROOT_NFS y + TUN m + NFS_V4 y + NFS_V4_1 y + NFS_FSCACHE y + NFSD m + NFSD_V2_ACL y + NFSD_V3 y + NFSD_V3_ACL y + NFSD_V4 y + + # Fail to build + DRM n + SCSI_ADVANSYS n + USB_ISP1362_HCD n + SND_SOC n + SND_ALI5451 n + FB_SAVAGE n + SCSI_NSP32 n + ATA_SFF n + SUNGEM n + IRDA n + ATM_HE n + SCSI_ACARD n + BLK_DEV_CMD640_ENHANCED n + + FUSE_FS m + + # Needed for udev >= 150 + SYSFS_DEPRECATED_V2 n + + VGA_CONSOLE n + VT_HW_CONSOLE_BINDING y + SERIAL_8250_CONSOLE y + FRAMEBUFFER_CONSOLE y + EXT2_FS y + EXT3_FS y + REISERFS_FS y + MAGIC_SYSRQ y + + # The kernel doesn't boot at all, with FTRACE + FTRACE n + ''; + kernelTarget = "vmlinux"; + gcc = { + arch = "loongson2f"; + float = "hard"; + abi = "n32"; + }; + }; + + ## + ## Other + ## + + riscv-multiplatform = bits: { + name = "riscv-multiplatform"; + kernelArch = "riscv"; + bfdEmulation = "elf${bits}lriscv"; + kernelTarget = "vmlinux"; + kernelAutoModules = true; + kernelBaseConfig = "defconfig"; + kernelExtraConfig = '' + FTRACE n + SERIAL_OF_PLATFORM y + ''; + }; + + selectBySystem = system: { + i486-linux = pc32; + i586-linux = pc32; + i686-linux = pc32; + x86_64-linux = pc64; + armv5tel-linux = sheevaplug; + armv6l-linux = raspberrypi; + armv7a-linux = armv7l-hf-multiplatform; + armv7l-linux = armv7l-hf-multiplatform; + aarch64-linux = aarch64-multiplatform; + mipsel-linux = fuloong2f_n32; + powerpc64le-linux = powernv; + }.${system} or pcBase; +} |